Sunguard™ RV Windshield Covers Simple Tutorials Sunguard RV covers are easy to install! Start with this step by step process... 1. Temporarily tape your Sunguard covers over the windshield, where they will fit, using masking tape. 2. Using a pencil, mark the coach where the fasteners are to be located. 3. Prepare to attach the fasteners to the coach body. Use the detailed instructions at the following links... Snaps Twist-locks Velcro® Using Pre-exsisting Fasteners 4. Mount the top-center fastener above the windshield first. 5. Mount the bottom-center fastener and then the four (4) corner fasteners in this order. The windshield is done! 6. Mount the side covers in the same way. Job complete! Care and Maintenance Product Storage On-Line Assistance If you need further assistance, don't hesitate to call us! Call 1-888-SUNGUARD or 1-888-786-4827